Clik here to view.
Kudo3D vs B9 Creator Jewelry Pendant
I have compared two pendants one created with B9 Creator and one Created with Kudo3D Titan1. Titan1 Print is looking good with high detailing, though i have created with 0.05mm layer thickness.Orange...
View ArticleClik here to view.
Jewelry Multiple Rings in 3DM – ABS
After 2-3 Days if R&D in Kudo3D Tintan1 Printer, we got succesful prints of different jewelry models. I take support from Kudo Tech support team and Mr James Kao to do R&D in Exposure time.This...
View ArticleNew Forum Coming
Hi everyone,I have been working with Kudo3D to improve the forum situation, and we are at the cusp of releasing a new forum that will be faster, more modern, and easier to use. It will involve fewer...
View ArticleReply To: Multi Stone Ring Poor surface quality and no stone setting detail
Your results seem to have improved substantially. Are there specific features that you still need improved on this print?You may be able to go down in exposure a little more (maybe another 10-20%). In...
View ArticleReply To: suggestions for improvements on future generations
I recently got a Titan 1 and was planning to get a spare vat and a small platform. I’m going to use it mainly for jewellery/small items. Getting the updated mesh platform would be great!Also, as...
View ArticleReply To: Multi Stone Ring Poor surface quality and no stone setting detail
Thanks James, Thanks Tech support team,I have changed the parameter as our your recommendation, and printed this the same ring with attached photos.Regards, KishanAttachments:You must be logged in to...
View ArticleReply To: Creation Workshop no longer free?
The issue with Creation Workshop is really outside of Kudo3D’s control, and has impacted the whole DLP resin printing community. There are many open source projects working to close the gap in...
View ArticleReply To: Titan 2… New and improved? Any way to improve the original?
I actually heard back from Kudo3D on this.They are going to have the new platform available to Titan 1 users. They said this would take approx. a month or so in order to manufacture shipping container...
View ArticleReply To: Titan 2… New and improved? Any way to improve the original?
I’d like to see the mesh build platform available on the store. I struggle regularly to get successful prints — I’d like to see Kudo3D throw us Titan 1 owners a bone with a periodic upgrade (for...
View ArticleReply To: Creation Workshop no longer free?
After taking some time off from printing, I too went and built a new system to run the Titan. I’m also a bit frustrated to find software initially given to the backers as now NOT free.What’s going on?
View ArticleTitan 2… New and improved? Any way to improve the original?
Kudo 3d,I just received the email about the Titan 2 and its improvements. Safe to say, after spending 2k for the first one (with its learning curve and all), its not easy to swallow the idea of buying...
View ArticleReply To: Multi Stone Ring Poor surface quality and no stone setting detail
The recommended exposure time for 3DM-ABS at 50XY, 35Z is 1.5 seconds.Recommended Printing Parameters: Exposure Time, Lifting Height, & Lifting SpeedThe problem depicted in your picture is...
View ArticleClik here to view.
Multi Stone Ring Poor surface quality and no stone setting detail
Dear Sir,I have downloaded Multi stone ring sample from Kudo3D Website. In Creation workshop i have make it one ring from eight ring bed, and slice it at 0.035mm. Printed with 3DM – ABS resin, with...
View ArticleReply To: Printing From a Raspberry Pi with Creation Workshop Host
Thanks, I will definitely try this when I get back to printing in a couple of weeks. I have a spare Raspberry Pi lying around and I’d love to free up the PC currently dedicated to printing.
View ArticleReply To: Printing From a Raspberry Pi with Creation Workshop Host
I have created a default printer template for the Titan 1, and I’ve printed about a liter of resin with this setup. If you have a Raspberry Pi 1-3, I would love to have you try it and give me...
View ArticleReply To: CRACKS ON PRINTED PART SURFACE – 3DM CAST
Can you attach some picture? I’ve used 3dm cast without any issues. (besides not being able to cast it). Maybe I can help.Both the printed objects. The settings that you have used for printing.Please...
View ArticleReply To: Castable resin purple?
Yes I’ve bought and tested this resin. It doesn’t work well with Titan. I can’t get clear prints. I even went bellow 1s exposure. So it’s not for DLP.
View ArticleReply To: Titan 1 is named top 10 Sub $5K SLA 3D Printer!
Hey Everyone,Here is another article that shows that the Titan 1 is in the top 4 Printers currently (17/3/16) on the market.Resin Printers: Established StandoutsCheck it out.As a FFF user I am looking...
View ArticleReply To: Printing From a Raspberry Pi with Creation Workshop Host
The wiki that I referred to is here:https://github.com/area515/Creation-Workshop-Host/wiki/Slicing-With-Creation-Workshop-Hostwhich was the only wiki at the time.Since then, we’ve opened up a...
View ArticleCRACKS ON PRINTED PART SURFACE – 3DM CAST
Hi ALL,we are printing on our Titan 1 with 3DM CAST material, which shows a manufacturing date of August 2015.The resin is new and always kept in dark place. We are printing with X Y resolution of...
View Article
![ONEW – KAKERA -Unmei no Piece- – EP [iTunes Plus M4A]](http://is1-ssl.mzstatic.com/image/thumb/Music221/v4/d0/fb/86/d0fb86a5-ba60-4bea-41fb-7f54c125f518/VEATP-45908.jpg/296x296bb.webp)
/pic9814888.png)
