I’m working on a print of a 3d character at work. This is my most challenging print to date and I had a failure when I came to my office this a.m. Kinda new I would but wanted to share what I’m learning on this one and curious about this weird glitch.
At first I thought I had a power outage and was kicking myself for not having bought another UPS yet to put behind my printer/computer at my work place. When I came in to look at the print, my computer was off and so was the Titan1. Still suspect a power issue of some sort but oddly enough when I looked at what printed I found I had got 2 legs from the print then the ACER logo. However the Acer logo was many layers thick so I don’t believe it was an instant power issue then Acer logo projected onto my build plate scenario. I need to run but I’ll post my print settings and would welcome input on this print as I’m thinking I want to try my FTD IB with pigment but afraid too. Not sure what to change in my print settings from MJ-SF to FTD. I’ll post my print settings tommorow a.m. but thought this was kinda funny.. Oh I realized that a support was missing between the legs so it would have failed soon anyhow. It’s hard trying to get supports and descent non overexposed areas on CG charachters! Also I realized my drain hole on the bottom of the boots filled in so I would have been susceptible to vacumm issues later in the print.