Fun to do Deep Black resin parameters.
Hi,Recently i have bought FTD Deep black resin and try to print with it but not getting success while printing. i am using XY 50 micron and Z is also 50 micron.problem that i am facing is that supports...
View ArticleClik here to view.
Test prints Mfleuret
after almost loosing my mind on how to set up the printer properly i finally managed to get some successful prints. printed both at 50 micron as tests This topic was modified 6 hours, 23 minutes ago by...
View ArticleReply To: Test prints Mfleuret
The whole beach is full of crabs, Watch out! The forum software is pretty funky unfortunately. Great print though!
View ArticleWhite residue on 3D prints are cleaning
So I realize we all combat this issue but hoping someone has some tricks they use to have the resin white buildup gone from there prints. I’ve minimized it but if you have any supports or defects on a...
View ArticlePrints suddenly not sticking to build plate
I am suddenly having an issue with my prints sticking to the build plate. Printing basically the same part I just printed without issue, with the same settings, but now the part will not stick to the...
View ArticleReply To: Test prints Mfleuret
Indeed ! Fun vacation tho ^^Yeah. Learned the hard way and fucked up a container in the process :/
View ArticleReply To: White residue on 3D prints are cleaning
I’m surprised to hear that you have white spot issues with 3DM-ABS. I’ve had a lot of white spot issues in the past with FTD and MakeJuice, but not with 3DM ABS or XSeries.I was able to reduce white...
View ArticleReply To: Prints suddenly not sticking to build plate
What procedures are you using to clean, or not clean, your build plates between prints?One thing I found that improves adhesion is to brush a small amount of resin onto the face and then cure it under...
View ArticleClik here to view.
Soluble Dyes
I’ve been experimenting with soluble dyes to try to duplicate the effect of 3DM-ABS’s extremely effective dye that avoids settling issues by using a dissolved dye rather than a suspended pigment, and...
View ArticleReply To: White residue on 3D prints are cleaning
Thanks James for this interesting link to Ym7. I’ve not come across this before. It seems like an interesting solution but has some overhead to get setup.I also thoroughly try to remove any surface...
View ArticleIphone 6s case
I rarely get permission to post prints of anything but one of my clients said I could share this print. It was designed by Austin Toth as a proto for an Iphone 6s case design he’s working on. Printed...
View ArticleReply To: Iphone 6s case
man this forum software blows! All the files I uploaded are below 500KB…Again..Attachments:You must be logged in to view attached files.
View ArticleReply To: Iphone 6s case
Crikey! I did the triple post as well. Sorry folks, can’t edit attachments.
View ArticleReply To: How to pause the Kudo3D software
co3Dprints, how did your 40% 3972 testing work out?
View ArticleReply To: How to pause the Kudo3D software
Hey Todd, I’m making my first batch with it this week. I’ve been slammed and no time to test. But I have a couple of mechanical prints coming and I’m going to try your mixture with those and see. I’ll...
View ArticleRaspberry Pi based host
Hi All,Is there any Kudo3D compatible Raspberry Pi based host software such as nanodlp?Cheers
View ArticleReply To: Prints suddenly not sticking to build plate
I typically clean the build plates with isopropyl alcohol after a print. I lightly sanded my small build plate, increased the lift height, slowed the lift speed, and finally got the part to print....
View ArticleReply To: Raspberry Pi based host
In theory, creation workshop host (https://github.com/area515/Creation-Workshop-Host) should work on the Titan 1. Once the authors of nanodlp add support for generic GCode devices rather than pulsing...
View Article
