Reply To: The cured resin can’t stick on the platform….
i’ve got the same problem and need your help!the printed object alway stick on the glass container.do not stick in the bild platform.i use the maker juice labs SF.i’ve ever tried many way by exposure...
View ArticleReply To: The cured resin can’t stick on the platform….
The most important thing to ensure that you have good build plate adhesion is that your have accurately set the Z=0 level at the level of the vat floor.The build plate should be close enough that when...
View ArticleReply To: Eager Plastics EP9009 Plasticizer
@Jkao I tried the EP9009 last night on a small lego train track print. I printed it twice and intentionally snapped apart the first print. Today I printed a toothpaste squeezer. For all prints I used...
View ArticleReply To: Eager Plastics EP9009 Plasticizer
Yes, that was my impression as well. It won’t magically turn MJ into 3DM-XSeries. Did you notice whether there was any chance in shrinkage?I have taken to generally adding 10%, especially to 3DM-ABS,...
View ArticleClik here to view.
Reply To: The cured resin can’t stick on the platform….
On the subject of the Z=0 level: There is always a downward and tilt movement of the build plate when tightening the ball head. This means that one corner always presses in harder onto the Teflon than...
View ArticleReply To: The cured resin can’t stick on the platform….
I used to crank down on the ball really hard, and in those cases, I would push down on one side of the plate with one hand while cranking the knob with the other.Nowadays, I don’t really tighten the...
View ArticleClik here to view.
Reply To: Eager Plastics EP9009 Plasticizer
Last night I printed a Lego-compatible part (20% plasticizer), and this morning I snapped a Lego minifig on and off the posts several times. The fit was very precise and snug. The posts didn’t chip or...
View ArticleReply To: Test of the mapping and overhang
I would like to see the mask you used for this as well, any chance Kentaro?
View ArticleReply To: About the making of the mask
How do I get this image out of CW as shown in the link from Jkao? I would like to experiment with adding a mask to some prints and feel I should figure out a way to get access to the adjustable image...
View ArticleReply To: Non-Settling Pigment – 1.5 micron molybdenum disulfide
@jkao What do you think of Titanium Dioxide powder? Since it’s used in UV sunscreen, that got me thinking about it. I’m trying to find a way to lighten resin color along with light-bleed blocking. The...
View ArticleClik here to view.
Reply To: Non-Settling Pigment – 1.5 micron molybdenum disulfide
It probably won’t work well. I’ve used zinc oxide, both in a nanodispersion (which, at 100nm, doesn’t settle at all) and in cosmetic grade powder. The problem is that it’s too selective at UV, and...
View ArticleReply To: Non-Settling Pigment – 1.5 micron molybdenum disulfide
I love 3DM-XGreen but it tends to fill in small details (viscosity and/or light bleed?) I have been adding some black pigment (0.5% Pearlx carbon black by weight) to 3DM-XGreen with good results. See...
View ArticleReply To: Test of the mapping and overhang
I’m sorry for my late response.This file is a mask and the shell scripts which I use.I have not yet tried Mask-Creator. I find the center from UV intensity and only bet the gradation of the perfect...
View ArticleReply To: Disable the "Move up Z 100" after print job finishes?
Same question with kevinrau.can not find and open” 310 of kudo_source/printrun/projectlayer_test.py”
View ArticleClik here to view.
does any one know where to buy the snap on clips and..
does any one know where to buy the back up snap on clips and hand screw for build platform like in the picture?the Plastic Star Head Metal Hand Knob Screw 10mm is differrent the pitch with the Tripod...
View ArticleReply To: Test of the mapping and overhang
Thank you Kentaro. Much appreciated! I’m going to probably just setup a batch routine in PS. I’ll post that batch script here for anyone else interested.
View ArticleReply To: does any one know where to buy the snap on clips and..
That screw is exactly a 1/4-20 thread used for tripod ball heads.
View ArticleReply To: does any one know where to buy the snap on clips and..
Do you have the website link to purchase?how about the snap on clip?thanks!
View ArticleReply To: does any one know where to buy the snap on clips and..
If you google for “1/4-20 knob”, you can find many different types. Some come with a machine screw already captured, others have a threaded insert to accept a machine screw that you can buy in a...
View ArticleKudo3D V2.0 software missing features?
Hi,I’ve searched desperately through the forums but I can’t find anyone talking about V2.0 of the Kudo3D software, so I apologize if this has been brought up already.I would like to be able to set the...
View Article
