How do you calibrate the machine for a .05 layer thickness print?
I understand that setting the projector at 192mm x 108mm you will get a 100 micrometer (0.1mm) resolution. Is this the same as setting the .1mm slice thickness, or am I just confusing myself?
Can I keep the projector settings at 192mm x 108mm and set the file’s slice thickness to .05mm for a finer print? Or do I have to calibrate the projector to 96mm x 54mm?
I am unsure if the files layer thickness is dependent or independent of the projector settings. Thank you for your help!
Best,
Mike
.