Quantcast
Channel: Kudo3D - High Resolution, High Speed DLP SLA 3D Printer » All Posts
Browsing all 1661 articles
Browse latest View live

Reply To: 3DM-XSeries (not able to post in original thread)

OK, tired it myself….Called 3DM-XGreen, I believe that is the only color they have and do not have non-pigmented. (green opaque)What I found was the bottle sitting on the shelve for a week (without...

View Article


Reply To: Additional Piece of Glass or Acylic to Protect Electronics

@PanagionisPlease contact us for the projector issue. For 3DM resins, the second version sidewalls of the vat have a lifetime about 120hours, including the time when the resin is sitting in the vat...

View Article


Reply To: Printer Isn't Hardening Resin At All

In the Kudo3d software as each layer is being projected, do you see anything in the preview window? If the projector is coming on, displaying a black and white image, and is close enough to the resin,...

View Article

Reply To: Printer Isn't Hardening Resin At All

Another thing to verify is that your XY resolution (controlled by the distance from projector to vat) is set correctly.For the Tiny Tank, that would be 37 micron XY resolution.The easiest way to do...

View Article

Reply To: PSP tray faillure and lift speed

After a bit of trial and error I have found that reducing the base thickness resulted in the most improvement.Printed with a 0.5mm thick base with following parameters1-1…….60..7..15 2-4…….30..6..15...

View Article


Reply To: PSP tray faillure and lift speed

Kudo recommends a base thickness of 0.3mm. Please let us know you it works.Tim

View Article

Reply To: Additional Piece of Glass or Acylic to Protect Electronics

James Kao, I’m speaking of the floor plate on vat, this plate has silicone on top, I know causes a problem for side wall but somehow incorporate this plate wider to the right to cover up larger cutout...

View Article

Reply To: 3DM-XSeries (not able to post in original thread)

White color-con did not work so well, pigment did not suspends as hoped….I’m now trying black color-con ink, that usually works better for that issue, I was in hope I could maintain original color of...

View Article


Image may be NSFW.
Clik here to view.

Reply To: Any trial of another stepping motor for blocking projector light.

Put hinges on that door as I had done, 75% of labor is gone…http://www.kudo3d.com/forums/topic/any-good-modification-to-your-machine/Pictures on page 3 This reply was modified 1 hour, 29 minutes ago by...

View Article


Reply To: PSP tray faillure and lift speed

I generally use a base layer that is 1 layer thick at whatever layer height I’m using (which is generally only 0.05 or 0.1mm).I believe that too thick of a layer makes the base layer too stiff, causing...

View Article

Reply To: Additional Piece of Glass or Acylic to Protect Electronics

I see, a wider vat itself so that spills will be further away from the cutout, and a wider cutout so that spills fall into the machine away from the projector, that makes sense.It should be possible to...

View Article

Reply To: Printer Isn't Hardening Resin At All

If you are calibrating for 100XY (the “large print area”) you probably need to cure for 12-14s per layer in my experience (and probably want to pick a different sample model).

View Article

Reply To: Printer Isn't Hardening Resin At All

OK I’ve cleaned off the resin and the original container is drying. I’ve got a second one ready to go.Now as someone new to this I’ve found additional mistakes. On the test print page of the website...

View Article


Reply To: Printer Isn't Hardening Resin At All

Unfortunately, the zoom range of the projector is not sufficient to go from 37 to 100 microns on zoom alone. You will have to move the projector the way that Jens does in the video.

View Article

Reply To: Titan 1 is named top 10 Sub $5K SLA 3D Printer!

Sweet!

View Article


Considering a Titan-1

Hello all,I’m looking to upgrade from fff to resin based printing. The Titan-1 looks very promising, but my last printer was a kickstarter project, and the product refinement and reliability left a bit...

View Article

Reply To: Considering a Titan-1

Among all of the sub-$5000 3D printers on the market today, I would definitely recommend the Titan 1 for the following reasons:(1) Reliable: fewest moving parts of all printers. No X axis...

View Article


Reply To: Additional Piece of Glass or Acylic to Protect Electronics

I had the same catastrophe with the VAT. Although instead of ABS it was with 3DM Cast and it was in the first hour. I went to the bathroom and let the printer alone for 5 minutes the most and the resin...

View Article

Reply To: PSP tray faillure and lift speed

I did get feedback from Kudo recommending 0.25 – 0.30 for base thickness.I will do a run later today as everything is a bit cold at present.Have had feedback from another Titan 1 operator that they get...

View Article

Reply To: Print sticking to vat after a few layers

Update based on a bit more experience. Attachment pad should be 1-4 layers thick. Any thicker and the separation forces cause issues.

View Article
Browsing all 1661 articles
Browse latest View live