Reply To: Considering a Titan-1
If you buy a Titan 1, figure out ahead of time which resin, resolution and lift height you intend to start off with. Then go through the forums and read through anything related to your intended set...
View ArticleDeep Black success!
First off, I just want to thank Craig Turley on his input and advice into using Deep Black with a Titan 1. For the first time, I was able to vertically print (with hardly any supports) a 32mm miniature...
View ArticleReply To: Deep Black success!
Awesome, glad to hear! I’ve had ok success so far, but I’m printing at 100XY, and the settings appear a little trickier. Still dialing them in!
View ArticleReply To: Deep Black success!
Hi CraigGlad to here that your prints are working for.What settings are you using?Tim
View ArticleReply To: Deep Black success!
Craig sent me his basic parameters as I’m trying to print something he has success with. Here’s what he wrote to me….First of, I’m 37xy 35z…Base line exposure is 2.9-3.0 / layer once you’ve moved...
View ArticleReply To: PSP tray faillure and lift speed
Hi PeterWhat program are you using to slice. And how are you setting up your supports? Size and distance apart?ThanksTim
View ArticleReply To: PSP tray faillure and lift speed
Using creation workshop to do the slice.Supports have 2mm base, 1mm main section and taper down to 0.5mm. For the far corners I remove the taper so that they are 1mm where they attach to the model.I...
View ArticleReply To: Vat 2 version Issues
Also having issues with the vat’s. Also have to take into account that Im starting up… So due to some stupid actions I ruined 1 and have another one with wrinkled foil. Nevertheless, 4 new vats would...
View ArticleClik here to view.
New user
Hi everybody I’ve received my titan 1 last week. I’ve installed everything and done the calibration. Yesterday night, I’ve done my first print and it was catastrophic…. If someone can help me because I...
View ArticleClik here to view.
Reply To: New user
Looking at the picture, the vat may be salvageable if you can get the base layer off. You need to do so using something like a plastic razor scraper that can gently separate the base layer off the...
View ArticleClik here to view.
The forum software here
Hey guys!I have a lot of trouble with the forum. Some threads think I am logged in, some don’t. Sometimes I have to log in and then open the software in a new tab to get it to think I am logged in. Is...
View ArticleReply To: New user
I would think that 13 layers at 60 sec. is too many and way over exposed!Tim
View ArticleTitan 1 for sale
Due to a busy work schedule and 2 kids I do not have the time to tinker with this machine. I am selling this machine new in the box unopened and is still in the garage. The buyer must be around the bay...
View ArticleCustomer service
It’s not to often you find a company that goes above and beyond the call of duty to help their customers out. I had issues with my projector accumulating dust inside the lens and causing grief for me...
View ArticleClik here to view.
Reply To: New user
Your layer thickness is set at 0.5, for 50 microns it should be 0.05.Try running the Kudo calibration model a few times at different exposures to dial in your exposure...
View ArticleReply To: Calibrating the projector
I am having trouble calibrating the projector at 37 microns. It seems I have to push the lens all the way up and the focus all the way to the left. Then I have to move the projector up and down to try...
View ArticleClik here to view.
Reply To: Calibrating the projector
@Kenzie Some months ago, @jkao visited me here in Oslo and we shot a video of how to use the grid + my general process. I don’t think he has had time to post it yet as I know he’s been on a really long...
View ArticleReply To: 3DM-XSeries (not able to post in original thread)
I am still having troubles with the X-series, tried black and still have very long print runs having problems….I can do short 1-2 hour runs with or without pigments
View Article