Reply To: 3DM-XSeries (not able to post in original thread)
Hello tdixon1000, Please could you share your setups in order to give you some advices when you print with our 3DM-XSeries resin. FYI, we didn’t notice back light effect at 75 microns XY resolutions...
View ArticleReply To: 3DM-XSeries (not able to post in original thread)
see attachments https://www.dropbox.com/sh/6uwky3j0p18dw4f/AACs5YF01k1EKkYh_OqVUxdaa?dl=0
View ArticleClik here to view.
Reply To: Thin Film Of Exposed Resin On Vat Bottom Making Long Print Times Fail
I am having a similar issue but with short prints as well. I was hoping adjusting printer settings would help but after reading all these posts I’m not so sure. Here is a video of the last print I did...
View ArticleReply To: Thin Film Of Exposed Resin On Vat Bottom Making Long Print Times Fail
The software has no way of setting the white and black levels of the projector, those can only be controlled by the video card and the projector itself. The software always displays a digitally black...
View ArticleReply To: Thin Film Of Exposed Resin On Vat Bottom Making Long Print Times Fail
Wow and there isn’t a way to fix this? I have an nvidia GTX 980. I don’t know why that video was set to private but it isn’t now. Thanks for the response. I set the display mode to “user” instead of...
View ArticleReply To: Thin Film Of Exposed Resin On Vat Bottom Making Long Print Times Fail
You can look into whether there are settings in the nVidia driver’s control panel that let you set the black level or brightness curves. Some people have found that there are adjustments that help,...
View ArticleReply To: Thin Film Of Exposed Resin On Vat Bottom Making Long Print Times Fail
Wish I had known that before buying the most expensive card 3-way sli. I’m not going to give up. I will keep trying to get it right. I hope I don’t burn through a bunch of vats before I get decent...
View ArticleReply To: Thin Film Of Exposed Resin On Vat Bottom Making Long Print Times Fail
Yes, the video is viewable. The bits that surface at the end of the video seem similar to background cure artifacts that other users have reported. In general, background cure is more intense at higher...
View ArticleReply To: Calibrating the projector
Ah cool, you found it. I also ended up making a video of myself doing it as part of a build video series that I did in Kudo3D’s office with a new unassembled printer.Jens is much better at the...
View ArticleReply To: Thin Film Of Exposed Resin On Vat Bottom Making Long Print Times Fail
Changing the display mode really worked well. I didn’t change my settings at all for layer curing and it came out very good. I think I could maybe even have done slightly less cure time past the...
View ArticleReply To: Thin Film Of Exposed Resin On Vat Bottom Making Long Print Times Fail
Awesome, glad that worked out easily.Could you post screenshots the settings in your NVidia control panel? In particular, since you changed it to “user”, then I think the values of the individual...
View ArticleClik here to view.
Reply To: Any good Modification to your Machine?
MakeX, copied the Vat design, or did they not? This reply was modified 13 hours, 25 minutes ago by tdixon1000.Attachments:You must be logged in to view attached files.
View ArticleReply To: Any good Modification to your Machine?
Sure appears that way. Guess you would have to compare them back to back.
View ArticleReply To: Any good Modification to your Machine?
They are selling them for $120, WoW! Kudo better get on the ball!! I don’t like the springs within the design to create the tension, not necessary or seems the film would be lazy loose.
View ArticleReply To: Some test prints!
Just completed the Mjolnir hammer for my son. Used Makerjuice G+. Quite happy with the results. But had lots of light bleed so I had to do a bit of post processing to get it to this stage.more images...
View ArticleReply To: Vat 2 version Issues
Is your up speed 150 or 25?I warped the teflon in a V2 tray and was told my lift speed of 50 was too high. I am now running at a lift speed of 15.
View ArticleReply To: Creation Work Shop- How do I export slice images
This took me a while to figure out as well. Assuming you have CWS v1.0.0.75 like I do, click Configure and then Configure Slicing Profile and then check the “Export to CWS” checkbox which will ungray...
View ArticleClik here to view.
Reply To: Some test prints!
Great print! I bet he loved that hammer. Nice finishing too
View ArticleReply To: Please help: Printer stopped working
i don’t know if it’s a common problem but it seems that i have the same troubles…after about 7times of green double blinking the board is off…no connection..i’ll perhaps have to try to change the...
View ArticleReplacing the Film in a V2 Vat
I was printing with MakerJuice today (some 3DBenchy prints that I’ll post about later) and had an accident in an overnight print that resulted in a layer getting exposed a few hundred times while stuck...
View Article