Reply To: Just started assembly
Thank again jkao.Stay tuned next for “High Noon Printing,” A modern day Western that will have you waiting for hours and hours to see who will print what and what will fail..
View ArticleReply To: Do I have enough support on this part ?
i usualy toss my long prints on as i go to bed so they are ready or failed when i wake up. makes it seem a lot faster than waiting all day
View ArticleReply To: Vat plate appears to be installed backwards
Whoa, yeah, unless Kudo3D changed the way the projector mount orientation works, that sheet metal plate on the top with the projection cutout seems to be flipped.
View ArticleReply To: Vat plate appears to be installed backwards
Yep pulled it off and realize that it must have been cut upside down and then whom ever assembled it at Kudo3D simply looked for the polished side to be up and put it together wrong. I’m flipping it...
View ArticleReply To: Vat plate appears to be installed backwards
I can’t start a new topic (being logged auto logged out right now?).After flipping the vat plate around and reinstalling everything I was finally ready to start working with my printer. However I can’t...
View ArticleReply To: Vat plate appears to be installed backwards
I have seen the green light turn on when the computer sends data to the printer, and then turn off afterwards.The first thing to check is that the motor driver and the connection from the stepper to...
View ArticleReply To: Just started assembly
If i go to my same thread I’m automatically logged out. Here is a video of the controller board light.I’ve rebooted my computer and the Titan1 but still same non result. There is no sound of a motor...
View ArticleReply To: File load doesnt work any more
The alternative is to run Kudo3D as administrator. I don’t have multiple users and I got this error the first time I was using it. Ideally it is a problem that should be resolved in software. Right...
View ArticleReply To: backward threads
OK, I checked box “reflect Y” in Image Reflection within CW, I just printed a part with left hand threads in the file and the print came out Right hand threads, what is the deal still?
View ArticleReply To: backward threads
It doesn’t seem to make sense that nothing would change with the Reflect Y button.I suggest that you model something that you can more easily tell is flipped or not by just looking at the slice files...
View ArticleClik here to view.
Reply To: backward threads
First off, the flip is no doubt happening, but here is the weird part…After you clued me into this “Y Reflect” option, I printed a file with right hand threads and they came out right hand, so I...
View ArticleReply To: backward threads
Depending on the sequence of how you did things in CW, there are various possibilities as to where changes to the machine and slicing profiles apply. For instance, if you changed the slicing profile,...
View ArticleClik here to view.
Kudo3D_titan Software won't close
I’m on my second print(failed), and when I try to close Kudo3D_Titan control software it does not respont, so I have to use ctrl+alt+del to do it. Am I doing something wrong? This topic was modified 6...
View ArticleReply To: 60mm figure with lots of thin protruding parts
Kudo3D Tech Support, Thank you for the reply, I will try updating the software. My projected image size is 192mm x 108 mm, and was slicing and printing the model at .075mm layer thickness which I now...
View ArticleReply To: 60mm figure with lots of thin protruding parts
Mike, if you next attempt fails (the difference between 0.075 and 0.1 Z is not that big), it would be helpful to take some reasonably clear pictures of the following:Any remnant on the build plate...
View ArticleA more detailed walk through of software setup needed
Hi:I´v e found trouble converting an STL file to the format needed by the printer software. A detailed step by step video showing the procedure will be of great help.Thank you!Patricio
View ArticleReply To: A more detailed walk through of software setup needed
Could you describe in more detail what additional information you’d like to see that’s not covered in my walk-through video?
View ArticleReply To: 60mm figure with lots of thin protruding parts
Excellent, thank you jkao I will post pictures, success or fail. I am going to try with the Ali file at 3.1 inches from bottom of feet to top of hair at .1mm layer thickness with SPOT HT resin.I am...
View ArticleReply To: Kudo3D_titan Software won't close
happened to me once. But most of the time it closes normally.
View ArticleReply To: 60mm figure with lots of thin protruding parts
I think 1mm is pretty thick for the base and risks build platform separation. I believe <=0.3mm has been recommended by others as the consensus best thickness. I always use exactly 1 layer thick....
View Article